Publicidad
Idiomas disponibles
Idiomas disponibles
Britax Child Safety, Inc.
Lap Belt with CLICKTIGHT
Before you begin:
• Check your vehicle owner's manual to determine what type
of vehicle belt you have and how it can be locked for use with
child seats.
• Check that your vehicle has a top tether anchor.
Britax recommends that the top tether be used at all times
when installing the child seat. Using the top tether will
improve the stability of your child seat and reduce the risk of
injury. Check your vehicle owner's manual for tether anchor
locations.
• Loosen the tether and place it over the child seat back to keep
it from becoming pinned between the child seat and vehicle
seat during installation.
• Adjust the child seat to desired position and place forward
facing on the vehicle seat.
1. Release the buckle and
open the CLICKTIGHT.
a. Locate the two slots in
the CLICKTIGHT cover.
b. Squeeze the
CLICKTIGHT release
levers.
2. Pull the vehicle belt out and
route along the green belt
path.
NOTE: Verify that the belt
is not twisted and then
buckle.
3. Lock your vehicle seat
belt system as instructed
by your vehicle owner's
manual and remove slack
from the vehicle belt.
IMPORTANT:
the belt may prevent the
CLICKTIGHT from properly
securing.
4. Close the CLICKTIGHT.
A click helps confirm the
CLICKTIGHT is secure.
NOTE: The child seat is
secure when it cannot be
moved front-to-back or
side-to-side more than
1 in. (2.5 cm) at the belt
path. If the child seat
is not secure, repeat
the installation or use a
different seating location.
14
Overtightening
Table of Contents
Publicidad
