Switching Between Modes; Harness To Booster Mode: Storing The Harness And Buckle - Britax GROW WITH YOU CLICKTIGHT Guia Del Usuario

Switching Between Modes

IMPORTANT:
use this seat in booster mode. To store the harness, follow the
instructions below. If you wish to remove, follow the instructions
on pages 32-33.
Harness to Booster Mode: Storing the Harness and
Buckle
1. Loosen the harness
completely.
a. Press release lever.
b. Pull both harness
straps forward.
2. Open the chest clip.
a. Press tabs
b. Pull apart
3. Release the harness
buckle and place the
harness straps around
the armrests.
4. Open the CLICKTIGHT.
a. Locate the
two slots in the
CLICKTIGHT cover.
b. Squeeze the
CLICKTIGHT
release levers.
5. Unhook the elastic
straps at the back of
the seat cover.
For select covers only:
Unhook the retaining
clips at the back of the
seat cover.
6. Pull the seat cover and
foam insert forward.
GROW WITH YOU CLICKTIGHT / PLUS User Guide
It is not necessary to remove the harness to
Table of Contents
29 29