Publicidad
Idiomas disponibles
Idiomas disponibles
Britax Child Safety, Inc.
Installing the Child Seat
General Information
Harness Mode
Install forward-facing only.
DO NOT use anything to raise the child seat off of the
vehicle seat.
Do not install with the lower anchors for a child
weighing more than 40 lbs (18.1 kg).
Britax recommends that the top tether be used at all
times when installing the child seat. Using the top tether
will improve the stability of your child seat and reduce
the risk of injury.
• Use this child seat in harness mode with children at least 2
years of age and who weigh between 25 and 65 lbs (11.3 – 30
kg) and who stand between 34 and 49 in. (85 – 125 cm) in
height. Britax recommends using harness mode until your child
outgrows its fit requirements. See the Child Fit Requirements
section on page 7 for more information.
• This seat may be used in either the upright or recline position in
harness mode (see figures at right).
Upright Position
8
WARNING!
Table of Contents
Reclined Position
Publicidad
