Placing Tool In Service - Ingersoll Rand 7803R Instrucciones

Taladros neumáticos reversibles

Ocultar thumbs

Contenido

Idiomas disponibles

FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.

WARNING

Always wear eye protection

when operating or perform-

ing maintenance on this tool.

WARNING

Air powered tools can vibrate

in use. Vibration, repetitive

motions or uncomfortable po-

sitions may be harmful to your

hands and arms. Stop using

any tool if discomfort, tingling

feeling or pain occurs. Seek

medical advice before resum-

ing use.

WARNING

Keep body stance balanced

and firm. Do not overreach

when operating this tool.

LUBRICATION

Ingersoll–Rand No. 50

Always use of an air line lubricator with these tools.

We recommend the following Filter–Lubricator–Regulator

Unit:

For International– No. C28–C4–FKG0

For USA– No. C28–04–FKG0–28

Before starting the tool and after each eight hours of

operation, unless the air line lubricator is used, pour

approximately 1.5 cc of Ingersoll–Rand No. 50 Oil into

the air inlet.

Model

Type of Handle

7803R, 7803R–EU

reversible, pistol

Tested in accordance with ANSI S5.1–1971 at free speed

♦ Tested in accordance to ISO8662–1 at 80% rated free speed

•

ISO3744

All manuals and user guides at all-guides.com

WARNING LABEL IDENTIFICATION

Do not carry the tool by the

hose.

90 psig

Operate at 90 psig (6.2 bar/

(6.2bar/620 kPa)

620 kPa) Maximum air pres-

sure.