Patek Philippe 324 S C FUS Travel Time Manual Del Usuario página 13

13
set the correct time (white stands for the daylight
hours from 6 a.m. to 6 p.m., blue for the night-
time hours from 6 p.m. to 6 a.m.). Once the watch
indicates the correct time, push the crown home.
If your watch has a screw-down crown (Aquanaut
models), it must be unscrewed before you can set
the time. When it is unscrewed, pull the crown
out to position 2 to make the settings. Then push
the crown back home and screw it down again.
Caution:
Please set the time before you put the watch on.
This prevents lateral pressure on the winding stem. Please
use your fingernails to pull the crown out and turn it gently
between two fingertips.
date correction
The date indicated by your Travel Time refers to the
local time zone. To correct the date display, actuate
the correction push piece between 6 and 7 o'clock
or at 4 o'clock (Aquanaut models) as many times
as needed to indicate the correct date.
Caution:
The date correction mechanism is blocked between
10 p.m. and 2 a.m. If you need to change the date, please do
so between 2 a.m. and 10 p.m.
display of a second time zone
Your watch has two center hour hands that move
synchronously and can be superposed. When the
two hands are not superposed, the solid hand indi-
cates local time (in the time zone in which you are
currently located) while the skeletonized hand indi-
cates home time (at your normal place of residence
or work). With the pushers in the case flank at 8 and
10 o'clock, you can move the solid local time hand
clockwise or counterclockwise in one-hour steps.