Medela Pump In Style Advanced Manual De Instrucciones página 7

Prior to first use:
Disassemble all parts of your kit and breastpump that come in
contact with the breast and milk (breastshields, connectors, valves,
membranes, bottles, and caps). Boil water for 10 minutes. It is not
necessary to clean tubing prior to first use.
Note: Medela offers Quick Clean
disinfection.
Important Notes:
• Always inspect the bottle, nipple and other components immediately
before and after each use.
• If nipples appear cracked or torn, discontinue use immediately.
• Do not attempt to enlarge the nipple hole.
• Always inspect AC to DC adapter and battery pack wires and cords
prior to use for any damage or exposed wire. If damage is found,
immediately discontinue usage of adapter or battery pack and call
Medela Customer Service at 800-435-8316.
After each use:
It is not necessary to clean tubing after each use (see Tubing Care
•
on page 6).
Disassemble all parts that come in contact with your breast and
•
breastmilk (breastshields, connectors, valves, membranes, bottles,
and caps).
Rinse all separated parts in cool water to remove breastmilk residue.
•
Wash all separated parts in warm, soapy water.
•
Rinse all separated parts with clear water.
•
Allow all disassembled parts to air dry in a clean area and store dry
•
parts when not in use. Do NOT store wet or damp parts.
Note: Make sure all parts are completely dry before re-assembling.
Use a damp (not wet) cloth to wipe the bag and diaphragm cap of
•
breastpump after each use. See part 14 on the illustration (page 3).
Micro-Steam
™ ™
bags for daily kit
5