Battery Pack Instructions; Battery Insertion - Medela Pump In Style Advanced Manual De Instrucciones

Pump In Style Advanced Battery Pack Instructions
®
The Pump In Style Advanced Battery Pack is intended for use
with the Pump In Style Advanced breastpump (manufactured
as of January 2008 or later) ONLY. The battery pack uses
8 AA alkaline batteries, or, for more consistent pump
performance, use rechargeable batteries. Each set of
batteries will provide approximately 2 hours of pumping time.
It is recommended that batteries be replaced or recharged
between the 10th and 12th pumping session.
Battery Insertion
Slide off battery covers. Place the NEGATIVE (-) end
of the battery against the front of the spring. Push the
battery in and down in one motion until the battery snaps
into place. The POSITIVE (+) end of the battery should be
near the positive sign on the battery pack.
Note: If the battery is inserted in the opposite direction, the battery may
not function correctly. Four batteries must be inserted on each side of
the pack. Replace battery covers.
16