Operation - Craftsman 247.299341 Manual Del Operador

Fuel Cap
Oil Fill Cap
& Dipstick
Tiller Tines
Now that you have set up your tiller for operation, get acquainted with
its controls and features. These are described on the next two pages
and illustrated on this page. This knowledge will allow you to use your
new equipment to its fullest potential.
WARNING
The operation of any tiller can result in foreign objects being thrown
into the eyes, which can damage your eyes severely. Always wear
safety glasses during operation or while performing any adjustments
or repairs.
RECOIL STARTER HANDLE
This handle is used to start the engine.
THROTTLE CONTROL
The throttle control is located on the side of the engine. It regulates the
spread of the engine and will shut off the engine when moved into the
STOP position.
Craftsman Tillers conform to the safety standard of the American National Standards Institute (ANSI).

OPERATION

Muffler
Air Filter
Meets ANSI Safety Standards
Handle
Handle Height
Adjustment
Depth Stake
Figure 10
CHOKE CONTROL
The choke control is found on the side of the engine and is activated
by moving the lever to the CHOKE position. Activating the choke
control closes the choke plate on the carburetor and aids in starting the
engine.
AIR FILTER
The air filter is a device on the engine air intake that prevents dust and
dirt entering the engine. See Figure 10.
MUFFLER
Engine exhaust exits the engine via the muffler. See Figure 10.
DEPTH STAKE
The depth stake controls the tilling depth. See Figure 10.
TINES
Tilling tines are used to cultivate, furrow and prepare your garden for
seeding. See Figure 10.
11
Forward Tine
Engagement Lever