Operation - cecotec CONGA 999 VITAL X Manual De Instrucciones

3. OPERATION

Start cleaning
- Hold down the power button on the robot to turn on the robot.
- Press the power button on the robot or on the remote control to start cleaning.
Warning
If the robot runs out of battery during cleaning, it will automatically return to the charging
base. Once the battery is fully charged, the robot can start a new cleaning cycle.
Warning
If there is no good access to the charging base, the robot will not be able to return to it. In that
case, once the robot has stopped, take it manually to the charging base.
Pause
- Press the power button on the robot or on the remote control to pause the cleaning
process.
- Press the power button on the robot or on the remote control to resume the cleaning
process. Fig. 23
Return to the charging base
Press the Back home button on the robot or on the remote control (with a house icon) in order
to send the robot to the charging base.
Turn off
Hold down the Start/Pause button to turn the robot off. Fig. 24
Warning
The robot vacuum cleaner has a power switch (with positions I and 0) located on the lower
part of the main body. If the robot will not be used for long periods of time, it is suggested to
switch it off. As a safety measure, if the robot is switched off, it will restore the factory default
settings. If you wish the robot to operate on the time programming mode, the switch must
always be in the I position. Otherwise, you must programme it again from the remote control.
Cleaning modes
This robot includes different modes and functions that can be activated from the remote
control.
Auto mode
- Press the power button for the robot to access the Auto cleaning mode.
- The robot will clean the whole surface, edges, around objects such as tables, chairs etc.
Once it starts running out of battery, it will return to the charging base. Fig. 25
ENGLISH
35