cecotec CONGA 999 VITAL X Manual De Instrucciones página 37

Power level function
Press the power level button on the remote control in order to control the robot suction power
while it cleans. There are three suction power levels: Turbo, Normal and Eco. Fig. 30
Scrubbing intensity function
Press the Scrubbing level button on the remote control to adjust the water level during the
scrubbing process. There are 3 water levels: high, medium or low.
Cleaning scheduling
This robot includes schedule settings for you to customise the cleaning cycles. The robot can
only be scheduled through the remote control.
Warning
Make sure the remote control is close to the robot when setting the clock or scheduling
cleaning cycles.
Setting the remote control clock
- Press the clock button on the remote control. The digits will start blinking.
- Select the current day of the week using the upwards and downwards buttons. To save the
selected date, press the Start/Pause button. Fig. 31
- Use the left and right buttons to set the minutes and hours. Use the upwards and
downwards arrow buttons to change the digits while they flash. Fig. 32
- Finally, press the power or the clock button. The robot will beep when the time settings
have been confirmed. Fig. 33
Setting the cleaning schedule
- For an easier cleaning, the robot includes a schedule function to set daily schedules
through the remote control. According to the setting, the robot will automatically start
cleaning in the selected days at the desired time.
- The time options on the remote control are: 12:00 a. m.–11:59 p.m. and 12:00 p.m.–11:59 p.m.
- Before setting the time and the robot options, make sure the robot power switch is on (I
position) and that the power button on the robot is lit up.
Press the schedule button on the remote control. The digits will start flashing. Fig. 34
- Use the direction buttons upwards or downwards to select the day. Once selected, use the
right and left buttons to select the minutes and hours. To change the minutes and hours,
use the left and right direction buttons when the digits start flashing. Press the power
button again to save the settings. Follow the same steps to schedule it. Fig. 35
- Finally, press the schedule button to exit the scheduling mode. The robot will beep once
indicating the scheduled cleaning settings have been confirmed.
- The user may schedule as many days a week as desired. The home screen will display
when the robot is scheduled.
ENGLISH
37