Fanaway Montclair Installation Instructions
• Carefully insert the Remote Receiver above the hanger ball in the remainder spacing in the mounting
bracket. Take care not to damage or loosen any of the wiring. (Fig. 9).
•
After completing the electrical connection at the mounting bracket terminal block, connect the ceiling fan
wiring via the quick connector plug.
•
Ensure the earth wiring is secure and correct, by performing an earthing continuity test from the fan's
accessible metal body and lamp base back to the earth terminal at the terminal block on the mounting
bracket.
•
Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy and
that the wires are not damaged during this step. Secure the canopy to the hanger bracket using the screws
provided. (Fig. 10)
9 | P a g e
FINISHING THE INSTALLATION
Fig. 10
Fig. 9