Fanaway Mya Installation Instructions
LIGHT KIT INSTALLATION (Fig.9 & 10&11)
1. Loosen the screw (2) from the fan bracket. Align the two slot screws with the keyhole slot (1) and (3)
of the light kit plate. (Fig. 9)
2. Turn the light kit counterclockwise until the slot screws are firmly at the end of the slots (2).
3. Secure screw (2) to the light kit plate. Tighten all three screws. Do not over-tighten.
Fan assembly
Light kit
assembly
4. Connect the quick connector of fan assembly to the quick connector of the light kit assembly (Fig. 9).
5. Loosen the screw (6) from the light kit plate. Align the two slot screws with the keyhole slot (4) and (5)
of the light kit plate cover. (Fig. 10)
6. Turn the cover counterclockwise until the slot screws are firmly at the end of the slots (6).
7. Secure screw (6) to the light kit plate cover. Tighten all three screws. Do not over-tighten.
8 | P a g e
FAN INSTALLATION
M Y A - M E N A R D S V e r s i o n 1 . 0 1 / 2 0 2 1
Fig. 9
Fig. 10