Leviton CTV5X Instrucciones De Instalación

WARNINGS:
• TO AVOID FIRE, SHOCK, OR DEATH: TURN OFF POWER at circuit breaker or fuse
and test that the power is OFF before wiring!
• TO AVOID OVERHEATING, DO NOT install a current transformer in an area where there
is breaker arc venting.
• Only authorized personnel are allowed to work on or to install/dismiss the product.
• If you are unsure about any part of these instructions, contact an electrician.
• Current transformers may not be installed in equipment where they exceed 75 percent of
the wiring space of any cross-sectional area within the equipment.
• Secure the current transformer and route conductors so that they do not directly contact
live terminals or bus.
• Accessories can be used with the product only if approved or specified by Leviton.
Installation
CAUTIONS:
• The contact surface of the core material has been waterproofed, however, it
still may be susceptible to rust.
• If there is rust, the contact surface must be cleaned with WD-40 or CRC5-56.
• DO NOT use any chemicals other than WD-40 or CRC5-56 when cleaning the
core or housing.
1.
Open.
2.
Insert wire and close.
3.
Make sure you hear a click sound.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada ULC to the attention of the Quality Assurance Department, 165 Hymus
Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper
use for five years from the purchase date. Leviton's only obligation is to correct such defects by repair or replacement, at its option. For details visit www.leviton.com or call 1-800-824-3005. This warranty
excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused,
opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions. There are no other or implied warranties of any kind, including
merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a
particular purpose, is limited to five years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment,
lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
For Technical Assistance Call: 1-800-824-3005 (USA Only) or 1-800-405-5320 (Canada Only) www.leviton.com
CTV Current Sensors
Cat. Nos. CTV5X, CTV01, CTV02, and CTV04
INSTALLATION INSTRUCTIONS
K
Cable Insulation 300 V
Isolant du câble 300 V
Aislamiento del cable 300 V
L
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
CAUTIONS:
• To be installed and used in accordance with appropriate electrical codes and regulations.
• Installation is intended for Over-voltage Category IV or Service Entrance.
• The product is designed only for the application specified in the operating instructions.
• Current transformers are not suitable for Class 2 wiring methods and are not intended for
connection to Class 2 equipment.
• Current transformer lead lengths may be extended up to 200 feet; however, this may
adversely affect the accuracy of meter readings.
• For indoor use only.
• SAVE THESE INSTRUCTIONS.
Dimensions
A
P2 P1
C
B
A x B C
Catalog
in. in.
Numbers
(mm) (mm)
0.97 * x 1.04 * 2.05
CTV5X
(25 x 26) (52)
CTV01
1.04 * x 1.50 ** 2.86
(26 x 38) (73)
CTV02
1.03 * x 1.76 ** 3.4
CTV04
(26 x 45) (87)
* The measurements may vary by plus or minus 0.02 in. (0.5 mm).
** The measurements may vary by plus or minus 0.04 in. (1.0 mm).
***The measurements may vary by plus or minus 0.06 in. (1.5 mm).
Wiring Diagram
LINE
N L1 L2 L3
X1
White
Black
X2 X1
White
Black
X2
X1
X2
LOAD
PK-A3445-10-02-5A
D
E
F
Specifications
D E F
in. in. in.
(mm) (mm) (mm)
** 1.7 * 1.38 * 0.43
(43) (35) (11)
*** 2.54 *** 2.20 *** 0.95
(65) (56) (24)
*** 3.03 *** 2.7 *** 1.42
(77) (68) (36)
P2
P1
A
B
C
N
X1
A
X2
X1
B
X2
White
X1
C
Black
X2
ENGLISH
G
H
G x H
in.
(mm)
1.37 * x 1.48 *
(35 x 38)
2.20 ** x 1.70 **
(56 x 43)
2.68 *** x 1.8 **
(68 x 45)
S2(BLK)
RL
S1(WHI)