A&D GC Serie Guia De Inicio Rapido página 10

Step 3. Place 10 samples on the weighing pan (or
on container).
The total weight of the samples is
displayed.
The number of samples changes in the order
5, 25, 50, 100, 10, 5 pieces when the
SAMPLE key is pressed.
NOTE The larger the number of samples, the
more accurate the unit weight will be.
Step 4. Press the ENTER key. Samples counted,
total weight and unit weight are displayed
after ------- is displayed.
If the unit weight is too light,
required number to be added are displayed.
Add additional number of the samples
displayed. Press the ENTER key to
update it.
You can ignore the
additional samples. However, counting
accuracy may not be sufficient.
Example: Add samples of 15 pieces.
Step 5. You may begin counting operations using the
unit weight entered.
and the
message for
10
10 samples
Samples counted
Total weight
Number of samples
5 25 50
pcs
10 100
Samples counted
Total weight
Unit weight
Add sample mark
Example for
30 pieces
Too light
English (EN)