Kärcher RBS 6000 Serie Manual Del Usuario página 13

Non-intended use
CAUTION
Risk of damage! The RBS 6000 is only suit-
able for the cleaning of vehicles with
straight, smooth side walls, whose incline is
smaller than 10°.
The operator of this cleaning system is lia-
ble for all damages incurred by improper
use; this applies specifically to the cleaning
of vehicles that are not listed in these in-
structions.
Sources of danger
General dangers
DANGER
Risk of injury from flying parts! Flying bro-
ken pieces or loose objects can injure per-
sons or animals. Keep the hall floor free of
loose lying objects.
Wear safety goggles during maintenance work.
Risk of explosion
DANGER
Risk of explosion! The system must not be
operated in the vicinity of potentially explo-
sive atmospheres. Only systems expressly
intended and marked for this purpose are
exempt. No explosive, highly flammable or
toxic substances may be used as cleaning
agents, such as:
Petrol
–
Heating oil or diesel fuel
–
Solvents
–
Liquids containing solvents
–
Undiluted acids
–
Acetone
–
In case of uncertainty, ask the manufacturer.
Damage to hearing
The noises emitted by the plant are not
dangerous. However, if parts that amplify
sound are shot blasted, it can give rise to
higher noise levels. If so, wear ear plugs.
Electrical dangers
DANGER
Risk of electric shock.
Never touch electrical cables, plug con-
–
nections and terminal boxes with wet
hands.
Electrical connecting leads or extension
–
cables must not be damaged through
being driven over, crushed, or pulled or
the like. Protect the power cord from
heat, oil, and sharp edges.
With mobile cleaning devices (e.g. with
–
high-pressure cleaners) the water jet
must never be aimed at electrical appli-
ances or units.
All current-conducting parts in the work-
–
ing area must be protected against jet
water.
Plants must only be connected to prop-
–
er earthed power sources.
All work on electrical parts of the plant
–
must be carried out only by a qualified
electrician.
Accessories that are not directly con-
–
nected to the system, must be integrat-
ed into the equipotential bonding.
Danger due to harmful substances
DANGER
Some of the detergents used contain sub-
stances that are hazardous to health, so it
is essential to follow the instructions provid-
ed or printed on them.
The water given off by the system is not
drinking water! The water is not of drinking
water quality due to the added detergents.
If treated processed water is used to oper-
ate the system, the germ inhibition regula-
tions of the manufacturer of the treatment
system must be observed.
Ensure that materials not normally present
during exterior cleaning of vehicles (e.g.
chemicals, heavy metals, pesticide, radio-
active materials, faeces or infectious mate-
rials) do not enter the washing bay.
Danger from power failure
An uncontrolled restart of the plant following
power failure is ruled out because of con-
struction measures that have been taken.
The brush will only turn if a safety switch is
activated.
Danger to the environment from waste
water
The locally valid regulations on waste water
disposal are to be observed.
Maintenance and monitoring
In order to ensure a safe operation of the
plant and to prevent dangers during mainte-
nance, monitoring and inspection, the corre-
sponding instructions have to adhered to.
Maintenance
Maintenance work must be carried out by a
specialist at regular intervals in accordance
with the specifications of the manufacturer.
The existing stipulations and safety re-
quirements are to be here observed. Work
on the electrical plant may only be carried
out by qualified electricians.
DANGER
Risk of injury. The system must be
switched off and secured against against
any unintentional and unauthorised restart
before maintenance and servicing can be
carried out.
Monitoring
This vehicle wash plant must be inspected
for its safe operational state before being
put into operation and afterwards at least
half-yearly by a specialist. The scope of this
inspection specifically includes:
visible inspection for externally recog-
–
nisable wear and damage respectively
Function test
–
completeness and effectivity of safety
–
installations for self-operation plants
daily before start of operation, for mon-
itored plants according to requirements
but at least once monthly.
2
-
EN
Use original parts.
Use exclusively original parts of the manu-
facturer or those parts recommended by
him as otherwise claims made under the
warranty will be rendered void. Observe all
instructions on safety and use which are
accompany these parts. This concerns:
replacement and wear parts
–
accessories
–
Fuel
–
detergents.
–
Emergency stop button
DANGER
Risk of accident due to defective safety
equipment! The system is equipped with an
emergency off switch and two "brush safety
switches".
Safety equipment must be checked for
proper function as needed, but at least
once a month.
13