Date And Time - SAME DEUTZ-FAHR iMonitor Uso Y Mantenimiento

SETTINGS
;From this screen the user can change the following settings:
1. Screen brightness
2. Language selection
3. Units of measurement
4. Colour scheme
5. Welcome message
To adjust the brightness:
turn the knob to select the option;

press the knob to activate editing mode;

to increase screen brightness: turn the knob clockwise;

to reduce screen brightness: turn the knob anti-clockwise;

press the knob to confi rm the setting.

For all the other settings (language, units of measurement, etc.) proceed in
the same way.
turn the knob to select the setting to be changed;

press the knob to activate editing mode;

turn the knob to select the desired value;

press the knob to confi rm the selected value.


DATE AND TIME

The screen displays the following elements:
1. Clock (non-interactive)
2. Date (non-interactive)
3. Date setting (day-month-year)
4. Time setting (hour-minutes)
5. SET (confi rm)
In this screen the user can adjust the clock as follows:
turn the knob to select the element you wish to change;

press the knob to activate editing mode;

turn the knob to change the value;

press the knob again to confi rm the value;

select "SET" and press the knob to confi rm the changes.

ALARMS
This screen page displays a list of all the I-Monitor alarms and error messages.
During normal operation the on-board computer does not display any messages.
To display the full list, press and then turn the knob.
To exit the list, press the knob.
1-4
USE AND MAINTENANCE
Fig. 7
Fig. 8
Fig. 9