SAME DEUTZ-FAHR iMonitor Uso Y Mantenimiento página 29

USE AND MAINTENANCE
1.1.4 - Using the "TRACTOR" application
To confi gure the tractor operating parameters, select the application repre-
sented by the "TRACTOR" icon.
press the MENU button;

turn the knob to select the TRACTOR application (2);

press the knob to activate the second level menu;

turn the knob to select the desired function;

press the knob again to access the submenu for the selected function

group.
Nine functions can be accessed from the Tractor menu::
1. Main
2. Engine
3. Transmission
4. Lift
5. ASM
6. Sequences
7. Remote valves
8. Performance Monitor
9. Camera (optional)
IMPORTANT
A description of the selected icon appears in a bar at the bottom of
the screen.
MAIN
The Main screen appears when the display is fi rst switched on by turning the ignition key.
This screen shows all all the settings affecting the tractor during operation:
1. Remote valve fl ow rate and activation time settings
2. Status of the hitch and position of the lift arms
3. Cruise speed settings for forward and reverse
4. Manual trigger (deactivation or activation of Performance monitor from the
main screen when in manual mode)
5. Performance monitor counters
6. Programmed operation sequence (SDS Comfort tip)
In the lower part of the SEQUENCES area the following functions can be
selected using the rotary knob:
1. Return to the previous operation
2. Program a new sequence of operations using the pushbuttons located on
the multifunction armrest
3. Execute the programmed operation sequence
4. Go to the next operation
5. Display of operation currently being executed
Fig. 15
Fig. 16
Fig. 17
Fig. 18
1-7