SAME DEUTZ-FAHR iMonitor Uso Y Mantenimiento página 33

USE AND MAINTENANCE
1. Operating status of selected remote valve
2. Maximum yellow fl ow rate setting (in %): press the knob and rotate to in-
crease or reduce the the fl ow rate as required
3. Maximum red fl ow rate setting:
4. Remote valve activation time setting (for valves 1 and 2 this function can
only be set from the multifunction armrest )
5. Lock control to fi x the ratio between the two fl ow rates
6. Float position enable/disable
7. Lock for single remote valve control
8. Remote valve priority setting
9. Switch control of remote valve to external control
10. Graphic representation of operation of joy stick controls 3/4, 5-7
11. Remote valve control
12. BACK: return to the main REMOTE VALVES page
The function (5) may be enabled or disabled. More specifi cally:
Flow rate ratio lock disabled: independent control of red fl ow rate via the potentiometer in the armrest,
while the yellow fl ow rate is controlled from the iMonitor.
Flow rate ratio lock enabled: the fl ow rates of the delivery and return lines are interdependent. In both
cases there is the possibility to adjust the difference in fl ow rate of the remote valve.
PERFORMANCE MONITOR
The performance monitor allows the user to record tractor operating data.
The performance monitor screen contains the following elements:
1. Simultaneous activation of counters
2. BANK 1: selected database
3. Working width setting
4. RENAME: rename the current counter
5. Performance monitor activation mode (manual, rear PTO, front PTO, hitch,
ON)
6. SAVE: saves the values of the selected counters
7. RESET: resets selected counter to zero
8. TRIGGER: starts selected counter (only in manual mode)
In the central area of the screen the user can select three counter functions from
the ten options available. The selected counters are then displayed in area 5 of
the main TRACTOR screen.
Fig. 28
Fig. 29
Fig. 30
1-11