Submenu 4 Settings - Abicor Binzel EWR 2 Manual De Instrucciones Original

8 Operation

8.7 Submenu 4 Settings

The Settings submenu is preset and can be changed as needed.
 4.2 Authorization levels/password on page EN-9
All settings for the EWR 2 Net are listed below.
EN - 20
Set the device language.
Set the background lighting.
Setting options:
— The background lighting remains on for 5 minutes after pressing a button on
the device.
— The background lighting remains permanently switched on.
Set the node ID for CANopen communication (display in hexadecimal
notation).
Set the baud rate for CANopen communication.
Set whether a DHCP server or a static IP address should be used for Ethernet
communication.
Set the static IP address.
Set the subnet mask for Ethernet communication.
Set gateways for Ethernet communication.
To open the submenus, press the <OK> button.
1
The following submenus are available:
To switch between the submenu items, press the <◄ ►> arrow buttons.
2
To select a submenu, press the <OK> button.
3
To select the required settings/values, press the <▲▼> arrow buttons.
4
To save the setting and go to the previously selected submenu item, press
5
the <OK> button.
To return to the main menu, press the <▲> arrow button twice or
6
the <On/Bypass> button twice.
EWR 2/EWR 2 Net