Before Starting - Stihl FC-MM Manual De Instrucciones

English / USA
Fueling
Your STIHL edger uses an oil-gasoline
mixture for fuel. For further instructions
see the safety precautions and the
chapter on "Fuel" in the MultiEngine
instruction manual.
!
Warning!
Gasoline is an extremely
flammable fuel. If spilled
and ignited by a spark or
other ignition source, it
can cause fire and serious
burn injury or property
damage. Use extreme caution when
handling gasoline or fuel mix.
Do not smoke or bring any fire or flame
near the fuel or edger.
Operating notes
The power tool may only be used for the
jobs described in the owner's manual.
!
Warning!
Your power tool is a one-person
machine.
6
5m (16ft)
To reduce the risk of eye and other injury
insure that bystanders are at least 16 ft
(5 m) away. Bystanders should be
encouraged to wear eye protection. Stop
the engine and cutting tool immediately
if you are approached. Start and operate
your edger without assistance.

Before Starting

Always check your power tool for proper
condition and operation before starting –
refer to appropriate sections in the
instruction manuals.
!
Warning!
To reduce risk of injury from MultiTool
rotating in the wrong direction, check
that the position of the gearbox is correct
and change it if necessary.
On metal tools (top illustration), position
the gearbox so that the shaft is below
the drive tube.
On sweeping tools (bottom illustration),
position the gearbox so that the shaft is
above the drive tube.
Also see notes on "Before Starting" in
the MultiEngine instruction manual.
FC-MM