Specifications; Zerowire® G2 Specifications - NDS Zerowire G2 Instrucciones

6

Specifications

en
6.1 ZEROWIRE® G2 Specifications
NOTE!
Specifications are subject to change without notice. Contact NDS for recent specifications.
Wireless signal type
Frequency band
Video inputs (Tx)
Video outputs (Rx)
Video compression
3D format support
3D signal types
3D video timings
HIPAA support
System latency
Maximum pairs per OR
RF power out
Maximum range
Data rate
Power consumption
*The effective range may vary depending upon the environment in which the product is operating. Follow the
instructions in section Setup [} 19] to achieve optimum performance and range.
Physical dimensions
Unit weight
Operating temperature
Operating humidity
Operating altitude
Storage temperature
Storage humidity
Storage altitude
Transport humidity
Transport air pressure
30 | Specifications
60 GHz wireless HD band (WiHD)
57 64 GHz
–
DVI-D, 3G-SDI
DVI-D
None
Line-by-line, top/bottom, side-by-side
DVI-D, 3G-SDI
1080p@59.94 (SMPTE 424M) only
256 bit AES encryption
< 1 frame
2
< 28 dBm/MHz EIRP
< 30 ft (9.14 m)*
950 Mbps - 3.8 Gb/s
< 8 W
9.3 in x 3.4 in x 2.0 in / 236 mm x 87 mm x 52 mm
(Single)
1.0 lb (0.45 kg)
32 °F to 104 °F (0 °C to 40 °C)
20 % to 90 % RH, non-condensing
6,600 ft (2,000 m)
-4 °F to 140 °F (-20 °C to 60 °C)
< 70 % RH (non-condensing)
33,000 ft (10,000 m )
< 70 % RH (non-condensing)
549 hPa – 1013 hPa