Rear Panel; Speaker Output - Ashdown Engineering CTM-15 Guia Del Usuario

CTM 15
USER GUIDE

REAR PANEL

LINE LEVEL DI
This XLR socket is used to connect the amplifier to a low impedance, balanced output on a PA
system or recording mixer.

SPEAKER OUTPUT

There are dedicated 1/4" jack outlets at 8 and 4 ohms speaker cabinet configuration. It is
important that the correct output or outputs are used to match the impedance load of your
cabinets.
POWER/PREHEAT
Use this switch to pre-heat the valves, bringing them u to the correct temperature before
performing.