Riding Operations Instructions; Before Riding; Riding; Braking - Joyor S5 Manual De Usuario

3.4 Riding Operations Instructions

3.4.1 Before Riding

• Choose a suitable venue for riding.
• Unfold the electric scooter according to the instructions.
• Adjust the height of the handlebar tube according to
your height.

3.4.2 Riding

• Press the power button to turn on the power. The speed
is set by default to gear level 1.
• For safety purposes, Joyor electric scooter has a safe
start design which means the motor can start only
when the speed of the vehicle is above 0. It prevents
motor start when the acceleration handle is pressed by
mistake. To start the riding operations, put one foot on
the standing board and the other foot on the ground and
kick scoot it like a classic kick scooter. When the scooter
is in motion and its speed is above 0, smoothly use the
acceleration handle to start the motor. Once the motor
starts, put the other foot on the standing board and
continue riding.
• When riding, adjust the gear level from 1 to 3, use lights
and horn according to the road conditions and according
to the situation.
• Be aware of the cruise control function. Cruise control
function is activated when the acceleration handle is
pressed with the same pressure for 3 seconds.
• Be aware of the possibility of unpredictable sudden
obstacles on your way and control the speed level.
EN
18

3.4.3 Braking

• Use the rear brakes handle for braking under normal
circumstances. Use front brake handle for braking in
emergency situations.
• The greater pressure you put, the greater braking force
will be applied. Be aware that hard braking may result in
an accident due to slipping of the wheels, loss of balance
and fall of the vehicle. Hard braking might also cause
damage to the tyre.
EN
19