Publicidad
Idiomas disponibles
Idiomas disponibles
3. INSTALLATION
We recommend using a trusted Rointe supplier for installation of the product. Find the
nearest one by calling us on 0203 321 5929 or using the locator on www.rointe.co.uk.
IMPORTANT: Prior to installation, please locate the metal tag located at the back
of the product and note the product reference and serial number. You will need this
information to register your guarantee. See section 8 for help on how to register the
guarantee.
WARNING: Do not install the product directly over an electrical outlet or junction box.
Do not install the product or use it outdoors. Do not install directly under a shelf. This
product is designed to be installed on an interior wall using the ROINTE template, the
installation kit and the fixings supplied. Do not install the product in such a way that it
encounters the power cable.
IMPORTANT: This product must never be installed with its control box in a raised
position. The vertical product must not be used horizontally. During installation, use
shims to prevent the control box from resting on the floor.
OK
The mains connection must be made in compliance with the voltage indicated on the
product's technical data label. This product is intended to be permanently connected to a
fixed installation. The supply circuit of theproduct must be fitted with a single-pole circuit
breaker with a contact separation of at least 3 mm. The product should be installed, if
possible, away from draughts (windows, doors) or anything else that could interfere with its
12
Publicidad
