Publicidad
Idiomas disponibles
Idiomas disponibles
An installation kit is included in the packaging. Follow the instructions below:
1. Choose the right part of the wall.
2. Place the mounting stencil on the wall, marking the places for the holes.
3. Remove the stencil and make the holes in the wall.
4. Insert the rawl plugs (A) in the holes made.
5. Screw the plastic bracket (B) to the wall with the Ø5.5 x 50 mm screw (C).
6. Screw the two brackets for supporting the product (D + E) to the horizontal tube of the
product like in Figure 1 with the Ø6 x 35mm screw (F).
7. Insert what you have assembled in Section 6 into the plastic piece (B). Fix well with the
Ø2,9 x 9,5mm fixing screw (H).
8. Place the cap (G) on the piece supporting the product (E).
Nº.
A
Ø 10 x 45 mm rawl plug
B
Plastic Bracket
C
Ø 5.5 x 50 mm screw
D
Plastic Bracket
E
Plastic Bracket
F
Ø 6 x 35 mm screw
G
Plastic Bracket Cap
H
Ø 2.9 x 9.5 mm fixig screw
I
Product
4. MAINTENANCE & CLEANING
The product does not require any maintenance. We recommend cleaning the product (back,
bottom of the product, etc.). Do not use abrasive substances on the product, clean it with
a damp cloth and neutral pH soap and the screen with a dry cloth. Before carrying out any
cleaning operation, make sure that the product is switched off and at room temperature.
14
ITEM
A
B
C
D
H
I
E
F
G
Publicidad
