Devolo Giga Bridge Manual página 74

25 Initial use
Pin 4/5
Note the correct pin assignment: Incor-
rect pin assignment results in wires from dif-
ferent wire pairs being used. This can impair
the transmission. The wiring in pairs is cor-
rect.
Plug one adapter of the Giga Bridge into an
1
available power socket next to the NT/ONT.
Connect the adapter of the Giga Bridge using
2
the provided network cable with the NT/ONT.
Connect the adapter of the Giga Bridge using
3
the telephone line (G.hn phone line socket,
phone) to a connection already in the wall.
The connection between the NT/ONT and
router
completed.
Wiring using coaxial
The connection using the coaxial cable via F-con-
nector is probably the least complicated option for
connecting the Giga Bridge. Simply remove a cable
on the coaxial distributor, set the other end of the
cable (F-connector) on the Giga Bridge, tighten
and you're done.
devolo Giga Bridge
over the telephone
Plug one adapter of the Giga Bridge into an
1
available power socket next to the NT/ONT.
Connect the adapter of the Giga Bridge using
2
the provided network cable with the NT/ONT.
Connect the adapter of the Giga Bridge using
3
the coaxial cable (F-type connection, coax) to
an existing line / existing connection.
The connection between the NT/ONT and
router over the coaxial cable is completed.
line is