Devolo Giga Bridge Manual página 88

39 Configuration
Status
In the Status area, you will find different status in-
formation for your Giga Bridge adapters. Here, you
can read off the current date and time, the config-
ured time servers, the MAC address and the active
and inactive services of your Giga Bridge adapters.
Services
Diagnostics: Current information about the
b
Giga Bridge adapters is transmitted to the
device manufacturer for service purposes
(active)
Update server: Improvements and updates are
b
automatically installed using this service
(active)
TR-069: Protocol for the data exchange
b
between the server of a communication pro-
vider and the connected terminal device of the
customer (inactive)
Web server (HTTP): Enables the display of the
b
graphical interface (active)
Management
In the Management area, you can configure vari-
ous settings on your Giga Bridge adapter. A major-
ity of these settings have already been prompted
devolo Giga Bridge
by the wizard. The information from the initial set-
up can be changed here.
Device name (hostname)
You can assign the Giga Bridge adapter a personal
device name by which it will appear in the net-
work overview.
Password
You can set a personal login password for access to
the web interface.
In the factory default condition of the Giga Bridge,
the integrated web interface is protected by a one-
time, automatically generated key. After the instal-
lation of the Giga Bridge, you should use a custom
key to rule out access by third parties.
To do so, enter the desired new password twice.
Now the web interface is protected against
unauthorised access with your custom password!
Identify device
The Giga Bridge adapter can be found using the
Identify device function. By clicking on Identify,
the LEDs will flash white for 2 minutes to make the
corresponding adapter visually noticeable.