Mounting; Mounting Preparations; Installation Procedure - Vega VEGAPULS 64 Instrucciones De Montaje

1
Abb. 10: Housing lock with Aluminium housing
1 Single chamber housing
2 Double chamber housing
3 Housing
4 Housing lock
1
Abb. 11: Housing lock with precision-cast stainless
steel housing
1 Single chamber housing
2 Double chamber housing
3 Housing
4 Housing lock
Abb. 12: Housing lock with electropolished stainless
steel housing
1 Housing
2 Housing lock
3

Mounting

3.1

Mounting preparations

Tool
Required tools:
•
Hexagon socket wrench (size 4)
3.2

Installation procedure

Proceed as follows:
1. Loosen the hexagon screws and dismantle
the clamp collars
Polarisation lock VEGAPULS 64, 69 • 4 ... 20 mA
3
4
2
3
4
2
1
2
2. For sensors with plastic horn antenna and
40 mm clamping diameter, use a adjusting
ring.
3. Assemble the clamp collars on the housing
- process fitting junction
Abb. 13: Mounting the housing lock
1 Housing
2 Clamp collars
3 Adjusting ring
4 Screws
4. Tighten hexagon screws evenly in two or
three passes. Tightening torque, see chap-
ter "Technical data".
5. Check if the housing is securely tightened
against the process fitting
3 Mounting
1
2
3
4
9