Nomenclature; Instrument Description; Description Of Function Keys; Meas Key - HT HT2236 Manual De Instrucciones

4. NOMENCLATURE

4.1.

INSTRUMENT DESCRIPTION

4.2.

DESCRIPTION OF FUNCTION KEYS

4.2.1.

/MEAS key

Press and hold the
measurements in the function selected with the MODE key. The instrument switches
automatically off after about 15s' idleness.

4.2.2. MODE key

Press the MODE key cyclically to access and select the possible measurements
performed by the instrument, listed below:
RPM: speed measurement without contact
rPm: speed measurement with contact
HZ: rotation frequency measurements with/without contact
M / M: speed measurement with contact in Meters/Minute
I / M: speed measurement with contact in Inches/Minute
F / M: speed measurement with contact in Feet/Minute
Y / M: speed measurement with contact in Yards/Minute
Long press MODE key (>3s) and select the below measurements:
REV: counter revolutions feature
M: length measurement in Meters
In: length measurement in Inches
FT: length measurement in Feet
Yd: length measurement in Yards
Length measurement is performed with the rubber wheel terminal (see § 5.2), considering
its circumference of 10cm.
Fig. 1: Instrument description
/MEAS key to switch on the instrument and perform the
EN - 4
CAPTION:
1. Removable mechanical adapter for
contact measurements
2. Extension sleeve for mechanical
adapter
3. LCD display
4. MEM key
5. MODE key
6. /MEAS key
7. Input for external adapter
8. Battery cover
HT2236