Nuface TRINITY+ Manual Del Usuario página 7

P R ECAU T I O N S ( C O N T I N U E D )
• Only use the external power supply (marked NuFACE) provided with the device with
the following specifications: 5VAC 1A. The use of accessories, transducers, and cables other
than those sold by NuFACE may result in increased emissions, decreased immunity of the
system, or injury.
• Always position the power adapter so it is accessible in case it needs to be disconnected
from the wall outlet.
• Children should be supervised to ensure that they do not play with the device.
The NuFACE Trinity+ and Mini+ devices are intended for cosmetic use on the face and neck as
described. Any consequence resulting from misuse, application of the device to other parts of
the body or face that are not approved for use, connection to improper voltage sources, dirty
spheres, expired or non-NuFACE conductive alternative, or any other improper application is neither
the responsibility of NuFACE nor its affiliates.
The device has been designed to provide freedom from unacceptable risk when used under
normal conditions and reasonably foreseeable hazards. In the event of complete loss of treatment
function, the device does not pose a risk to the user.
TREATMENT AREAS AND TECHNIQUE
The instructions below are designed to provide users with the most effective results when
followed correctly.
TREATMENT
• The device is designed to stimulate large surface areas of the face and neck, such as the jawline,
cheekbones, and forehead. DO NOT use the device directly over the midline of the neck.
TECHNIQUE
• Using light to medium pressure, lift one side of the face and neck at a time using a gliding motion.
IMPORTANT: Always ensure that both spheres are in contact with the skin during treatment.
• For more advanced treatment options and holds, download the NuFACE App, or visit our website
at www.NuFACE.com.
BEFORE USING YOUR NEW DEVICE
Follow these important steps before using your new device:
1) CHARGE YOUR DEVICE
Trinity+: Charge your Trinity+ device for ten (10) hours before the first use or until all
three (3) LED indicator lights are lit solid.
• Remove your Trinity+ device, charging cradle, and external power adapter from the box.
• Connect the external power adapter to the charging cradle and plug the adapter into the
wall outlet, keeping it away from any source of water.
• Place your Trinity+ device on the charging cradle.
• The lights will increasingly illuminate, indicating that your device is charging.
• Your device is fully charged when all the all the lights stay illuminated.
Mini+: Charge your Mini+ device for four (4) hours before the first use or until
all three (3) LED indicator lights are lit solid.
• Remove your Mini+ device, and external power adapter from the box.
• Connect the external power adapter to the Mini+ device and plug the adapter into the
wall outlet, keeping it away from any source of water.
• The lights will increasingly illuminate, indicating that your device is charging.
• Your device is fully charged when all the all the lights stay illuminated.
The device will NOT turn on when it is charging.
10
B E FO R E U S I N G YO U R N E W D E V I C E ( C O N T I N U E D )
2) TEST YOUR SENSITIVITY
IMPORTANT: Test your skin to make sure you are not sensitive to the NuFACE
Microcurrent Activator.
• Rub a small amount of Microcurrent Activator on your forearm and leave for 15-30 minutes
before washing it off.
• If an allergic reaction (rash, redness, etc.) develops, DO NOT continue application of the
Microcurrent Activator. Contact your healthcare provider if the allergic reaction persists.
Go to www.NuFACE.com to view other alternate NuFACE activators.
HOW TO USE YOUR DEVICE
Get ready to Tone, Lift, and Contour.
The instructions below are designed to provide the most effective results when followed correctly.
1) CLEANSE
• Cleanse your face and neck with an oil-free cleanser. Men should shave before treatment —
facial hair can interfere with the conductivity of the spheres.
Note: Any cream, lotion, self-tanner, and/or oil-based products on the skin can block the
microcurrent.
2) ACTIVE
IMPORTANT: Always apply a NuFACE Microcurrent Activator when using your device.
• Apply a mask-like layer of the NuFACE Microcurrent Activator section-by-section as you treat.
• Reapply activator if skin becomes dry during treatment in order to continue safely using device.
3) PREPARE YOUR DEVICE
• Trinity+: Remove your device from the charging cradle and turn it ON by pressing the ON/OFF
button.
• Mini+: Remove the power adapter from the device and turn it ON by pressing the ON/OFF
button.
• An ascending audible beep is emitted, the energizing hum will begin, and the lights will illuminate
indicating that your device is ON.
• Adjust the intensity level to your comfort by pressing the ON/OFF button on the front of
your device.
• As you increase or decrease intensity, an audible beep is emitted, and the number of illuminated
lights will change.
DEVICE INDICATORS
TREATMENT LEVEL INDICATOR LIGHT
Minimum Intensity
First Light Illuminated
Medium Intensity First & Second
Light Illuminated
Maximum Intensity All (three) 3 Lights Illuminated
DEVICE AUDIBLE SOUND DEVICE INDICATION
Ascending Beeps & Hums
Powered ON
Descending Beeps Powered OFF
Single Beep
Intensity Adjusted
Dual-Tone Beep End of Glide Interval
(Tone occurs only during treatment)
Low-Tone Beep Battery Needs To Be Charged
(Tone occurs only during treatment)
11