Display Settings - Fronius Symo Advanced 10.0-3 208-240 Manual De Instrucciones

Factory setting
Date display format
For specifying the format in which the date is displayed
Setting range
Factory setting
Daylight saving time
Activating/deactivating the automatic adjustment for daylight saving time
IMPORTANT! Only use the automatic daylight savings changeover function
when there are no LAN or WLAN-compatible system components in a Fronius
Solar Net ring (e.g. Fronius Datalogger Web, Fronius Datamanager or Fronius
Hybridmanager).
Setting range
Factory setting
IMPORTANT! The time and date must be set correctly for day and year values
to be displayed properly.

Display Settings

Setting range
Language
Setting the display language
Setting range
Night mode
Night mode controls the Fronius DATCOM and the inverter's display operation
at night or when insufficient DC voltage is available
Setting range
Factory setting
depends on the country setup
mm/dd/yyyy or dd.mm.yy
depends on the country setup
on/off
on
Language / Night Mode / Contrast / Illumination
English, German, French, Spanish, Italian, Dutch,
Czech, Slovakian, Hungarian, Polish, Turkish, Por-
tuguese, Romanian
AUTO / ON / OFF
OFF
AUTO: The Fronius DATCOM operation is maintained as long as a Fronius
Datamanager is connected to an active, uninterrupted Fronius Sol-
ar Net.
The inverter display is dark during the night and can be activated by
pressing any function key.
ON: The Fronius DATCOM operation is always maintained. The inverter
provides an uninterrupted 12 V DC voltage to supply Fronius Solar
Net with power. The display is always active.
IMPORTANT! When the Fronius DATCOM night mode is ON or on
AUTO with connected Fronius Solar Net components, the power
consumption of the inverter at night increases to around 7 W.
39