Checking The Clutch Fluid Level; Removing The Engine Protector - SHERCO 250-300 SE/R 2013 Manual Del Propietário

CHeCKing THe ClUTCH FlUid level

reMOving THe engine PrOTeCTOr

All manuals and user guides at all-guides.com
- Turn the knob
move the lever away from the handlebar.
B
Clutch lever free play A
h
1
- The hydraulic fluid is highly corrosive it can be dan-
2
gerous to the skin.
3
- Read the recommendations on the container.
Position the master cylinder horizontally.
- Remove the two screws
and the membrane
- Check the fluid level and fill if necessary.
Level of brake fluid below
the top of the reservoir.
Minerva brake fluid DOT 4
- Reinstall the lid with the membrane and the
screws.
Remove the screws
protector.
1
in the opposite direction to
B
≥3mm
aTTenTiOn
, the cover
1
3
and remove the engine
1
2
4mm
107