Adjusting The Travel Of The Rear Brake Pedal; Checking The Rear Brake Fluid Level; Filling The Rear Brake Reservoir With Brake Fluid - SHERCO 250-300 SE/R 2013 Manual Del Propietário

250-300 SE/R
Brakes (continued)

adjUsTing THe Travel OF THe rear BraKe Pedal

2
1
3
4

CHeCKing THe rear BraKe FlUid level

Filling THe rear BraKe reservOir WiTH BraKe FlUid

1 2
a
116
All manuals and user guides at all-guides.com
- Remove the spring
- Loosen the nut
Rear brake pedal travel
Hold the shaft
Nut
- Reinstall the spring
Position the motorcycle on a flat surface.
Check the fluid level through the sight glass.
Ensure that the level (between the arrows) is
closest to the up arrow.
If the level is below the MIN mark, top up the
brake fluid according to the instructions below.
Remove the cap
Fill with fluid to the mark as shown
Minerva brake fluid DOT 4
- Reinstall the membrane and the cover using a
new O-ring.
1
and turn the shaft
2
and tighten the nut
3
2
1
miN
with its membrane
1
3
3mm ≥ ≥5mm
a
.
2
M6 10Nm
.
2
a