EN
•
The appliance was designed only for indoor use and non-extreme tem-
perature conditions; do not leave it exposed to the elements (rain, sun,
etc.).
•
The manufacturer accepts no responsibility and the warranty will not
apply for any commercial use, inappropriate handling or use of the ap-
pliance, any damage resulting from use for other purposes, faulty oper-
ations, non-professional repair or failure to comply with the instructions.
•
After removing the packaging, and before use, make sure the appliance
and all the attachments are working well. The electrical plug and sheath
should not be cracked or broken. If the conditions described above oc-
cur, immediately unplug the appliance from mains outlet and take it to
an authorized After-Sales Service Centre for necessary checking.
•
The packing materials (plastic bags, expanded polystyrene, nails, etc.)
should be kept away from children since they are potential sources of
danger.
•
Put the appliance on a fl at, smooth and stable surface. Do not put it
close to/on hot surfaces as heaters, cooking hobs, fl ames and similar;
furthermore, avoid the contact with easily fl ammable objects, as cur-
tains, cloths, paper, etc.
•
Before connecting the appliance, make sure the label data correspond
to the mains. The tag is located on the bottom of the appliance body.
•
Do not leave the appliance connected when not in use. Remove the plug
from the mains outlet when the appliance is not used.
It is not possible to start the appliance when the arm (1) is raised.
Turn the selector (11) to "0", lower the arm and proceed with the
following processing.
It is recommended to power the appliance via a residual current de-
vice with a max. operating current of 30 mA.
Avoid unplugging the appliance by pulling the power cord.
While in use, the power socket must be easily reachable in case it is
necessary to unplug the appliance.
2. Warnings
22