Putting The Device Into Operation - Emos E0389 Manual De Instrucciones

4. A menu for choosing the Wi-Fi network will open up – choose the network name, enter password
and tap Next.
5. A SCAN table will appear; tap Confirm.
6. Connect the power adapter to the weather station and long-press the MODE button; SCAN will
appear on the screen and the
7. If pairing has been successful, „Succcessfully added device" will appear on the screen and
the station will load and display all forecast and time information. The screen will display the
icons.
8. The main screen of the paired station will open in the app, showing the indoor temperature and
humidity (fig. 2).
If pairing of the station with the app fails or „The device is offline" is displayed on the screen, repeat
the process from step 1.
If you wish to change Wi-Fi networks, long-press the MODE button on the station; SCAN will appear
on the screen and you can repeat the pairing process in the app.
Always use the power adapter when connected to Wi-Fi, otherwise the batteries will quickly drain!
Data is automatically synchronised every 30 minutes.

Putting the Device into Operation

1. Connect the power adapter to the weather station, then insert batteries (3× 1.5 V AA) into the
station. When inserting the batteries, make sure the polarity is correct to avoid damaging the
weather station. Only use 1.5 V alkaline batteries of the same type; do not use rechargeable 1.2 V
batteries. The lower voltage may cause both of the units to not function.
2. Pair the app with the station (see Signing into the Application and Pairing with Wi-Fi).
3. If the low battery icon
Setting the Weather Station
Tap the main screen with indoor temperature and humidity in the application.
A station settings menu will open.
1. Basic Settings (Fig. 3)
Touch tone – activation/deactivation of button sound
24 hours format – activation/deactivation of 24 h time format
Day-Month format – day.month/month-day date format
Degrees Celsius – °C/°F unit of temperature
Normal-brightness – brightness level of station screen backlighting 30/60/100 %
Backlight duration – backlighting duration: 15/30/60 seconds/*permanent
*only works with the power adapter connected
function activation
function deactivation
2. Alarm Settings (Fig. 4)
The station has two alarms.
Select alarm 1/2 or both and set the time, choose the alarm days and confirm by tapping Save.
Activate /deactivate
You can end the ringing of the alarm (
tivating it in the app
The alarm will trigger on the next set day.
If you have not selected a day, the alarm will activate only 1× and the
If you do not press any button while the alarm is ringing, the ringing will stop automatically after
1 minute.
3. Weather Settings (Fig. 5)
Regional Settings – sets location for forecasting
Server – selects data server 1/2/3
will be flashing.
appears, replace batteries in the station.
the alarm.
icon flashing) by pressing the MODE button or by deac-
.
8
icon will not be displayed.