Descargar Imprimir esta página

Installing Optional Accessories - SPORTSTECH VP500 Manual De Usuario

Ocultar thumbs Ver también para VP500:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

4. Installing optional accessories

WARNING! Risk of injury from moving, damaged or loose parts!
Install all parts and accessories according to the instructions.
Install parts and accessories only when the device is switched off.
Before each use, ensure stability of knot and perfect condition of eyelets and of straps
and ropes.
Never use damaged parts! Correct the knots if necessary!
WARNING! Risk of tripping on installed accessories.
4.1 FASTENING THE FULL-BODY-BAND
Insert the ends of the full-body band from below through the side
eyelets of the vibration plate.
Adhere the two Velcro surfaces to each other (example illustration
on the right; see also overview drawing).
Also during exercise, check that the band is securely fastened on
both sides.
Setting the length of the full body band is described in Chapter 7.3.
4.2 FASTENING STATIC STRAPS
Insert one end of each static (inelastic) strap through the side eyelets on the vibration plate from below.
Adhere the two Velcro surfaces to each other. Also during exercise, check that the band is securely
fastened on both sides.
4.3 FASTENING ELASTIC ROPES
The elastic ropes shall be fixed in two long, fold-out metal eyelets at the bottom front of the vibration
plate (see overview drawing in Chpt. 2). The eyelets are swivelled under the plate on delivery and can be
swivelled back there for storage.
Lift the front of the plate slightly. Using your fingers, swivel each eyelet forward and towards the center
of the plate by 90°.
Check the eyelets for proper seat. If the eyelets are too loose or too tight, swivel the bottom of the
vibration plate upward with the help of a second person. Correct the tightness of the screw connection
using a Phillips screwdriver.
Guide the loop at the end of the rope through one of the eyelets.
Guide the handle of the rope through the loop. Pull the handle to tighten it and to form a knot.
Repeat the above steps with the second rope on the opposite eyelet.
Also during exercise, check that the rope is securely fastened on both sides.
1
3
2
4
EN
DE
23

Publicidad

loading