Publicidad
Idiomas disponibles
Idiomas disponibles
5. Assembly Instructions
CAUTION! Risk of injuries from heavy components and from improper assembling!
•
Tighten all individual parts and pre-assembled parts firmly!
•
Check the tightness again before each training session!
•
Perform the assembly with a second, adult and sufficiently strong person.
NOTE! Some of the smaller parts may already be preassembled.
109 6mm (Qty 1)
ST
5.1 STEP 1
•
Mount the front (85) and rear stand (86) to the frame with two umbrella head Allen screws (87) and
half-round washers (20). Tighten the screws clockwise using the Allen key (109). Use the packaging
material (styrofoam; ST) to support the main frame at the beginning of the assembly.
32
(87) M8×56mm (Qty 4)
(20) Ø8xØ19×2T (Qty 8)
Publicidad
