Symbol on petrol pump:
Press petrol pump (primer)
3x before the start.
Symbols on the filler cap:
Note on the petrol filler
Symbol over the oil tank cap:
Engine oil expands when heat-
ed! When changing the engine
oil, note the maximum mark on
the dipstick.
Caution!
Risk of burn injury.
Symbols on the handle bar:
ON
I
Stop the equipment:
0
OFF
Release the safety catch
Wheel drive on:
Pull up the drive catch
STOP
Graphical symbol on the
lateral ejection chute:
N.B. The side impact protec-
UNLOCK
tion must be unlocked before it
can be opened
Graphical symbols on the
charger
The charger is only suitable for use
indoors.
Protection class II
Electrical devices must not be
disposed of with domestic waste.
Polarity
Safety transformer –
short-circuit proof
Symbols in the manual
Warning symbols with informa-
tion on damage and injury pre-
vention.
Instruction symbols (the instruc-
tion is explained at the place of the
exclamation mark) with information
on preventing damage.
Help symbols with information on
improving tool handling.
Safety Instructions
This section deals with the basic safety
procedures when working with the equip-
ment.
WARNING! Read all of the safety
instructions and directions. Failure
to observe the safety instructions
and directions may result in electric
shock, fire and/or serious injury.
Instructions:
•
Read the operating instructions care-
fully. Familiarise yourself with the con-
trols and with the correct use of the
equipment.
•
In case of uncertainties, allow yourself
to be given instruction concerning the
use of the device and prohibited op-
erations.
GB
101