Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Storage During Longer Breaks
from Operation
Non-observance of the storage
instructions may cause starting
problems or permanent damage
as a result of fuel residues in the
carburettor.
•
Empty petrol tank in a well-ventilated
place.
•
Empty carburettor: For this purpose,
start motor and leave it running until
the motor stops. Let motor cool down.
•
Change the oil (see "changing the en-
gine oil ").
•
Preserve the engine:
- Unscrew the spark plug (see "clean-
ing and maintenance"
- Change/adjust spark plug;
- Pour a tablespoon of engine oil
through the spark plug hole into the
engine compartment;
- Pull the starter cord slowly several
times with the safety catch pulled in
order to distribute the oil inside the
engine;
- Screw the spark plug tight.
•
Dispose of used oil and petrol resi-
dues in an ecofriendly manner (see
"disposal / environmental protection").
There is no need to drain the petrol
tank if a fuel stabiliser is added to
the petrol.
114
Disposal / Environmental
Protection
•
Return the tool, accessories and
packaging to a recycling centre when
you have finished with them.
- Carefully drain the petrol and oil
tanks and take your equipment to
a recycling centre. The plastic and
metal parts that are used can be
separated by type and thus recy-
cled.
- Take used oil and petrol residues
to a disposal point and do not pour
them into the sewer system or down
the drain.
- Please contact your Grizzly dealer.
•
Defective units returned to us will be
disposed of for free.
•
Do not throw cut grass in the dust-
bin but rather compost it or spread it
under bushes and trees as a mulch
layer.
Publicidad
