Publicidad
Declaración FCC adicional para productos de telecomunicaciones (Estados Unidos)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
back of this equipment is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The REN is used to determine the quantity of devices, which may be connected to the telephone line. Excessive
RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but
not all, areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that
may be connected to the line, as determined by the total RENs, contact the telephone company to determine the
maximum REN for the calling area.
This equipment uses the following USOC jacks: RJ11C.
FCC-compliant telephone cord, jack and modular plug should be used with this equipment. This equipment is
designed to be connected to the telephone network or premises wiring using a compatible modular jack, which is
Part 68 compliant. This equipment cannot be used on telephone company-provided coin service. Connection to
Party Line Service is subject to state tariffs.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. If advance notice is not practical, the telephone company
will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC
if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could
affect the operation of the equipment. If this happens, the telephone company will provide advance notice in
order for you to make the necessary modifications in order to maintain uninterrupted service.
If trouble is experienced with this equipment, please see the numbers in this manual for repair and (or) warranty
information. If the trouble is causing harm to the telephone network, the telephone company may request you
remove the equipment from the network until the problem is resolved.
The customer can do the following repairs: Replace any original equipment that came with the device. This
includes the print cartridge, the supports for trays and bins, the power cord, and the telephone cord (if provided).
It is recommended that the customer install an AC surge arrestor in the AC outlet to which this device is
connected. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.
Telephone Consumer Protection Act (Ley estadounidense de protección del consumidor
telefónico)
La Ley de Protección del Consumidor Telefónico de 1991 declara ilegal que una persona utilice un equipo u otro
dispositivo electrónico, incluidas máquinas de fax, para enviar un mensaje a menos que dicho mensaje contenga,
claramente, en un margen de la parte superior o inferior de cada página transmitida o en la primera página
de la transmisión, la fecha y hora de envío y una identificación de la empresa, entidad o individuo que envía el
mensaje y el número de teléfono de la máquina emisora o de dicha empresa, entidad o individuo. (Es posible que
el número de teléfono proporcionado no sea un número 900 ni ningún otro número cuyas tarifas sean superiores
a las de una llamada local o de larga distancia).
Declaraciones sobre la funcionalidad inalámbrica
Las declaraciones de esta sección son aplicables exclusivamente a modelos de impresoras compatibles con
funcionalidad inalámbrica.
Declaración FCC adicional para productos de telecomunicaciones (Estados Unidos)
161
Publicidad
Solución de problemas
