Publicidad
Adjusting the brake callipers
Active Bike
If the brake is too tight or too loose, use the Allen key to loosen bolt (C), then adjust the brake cable, (shorten the brake cable
upwards if it is too tight, if it is too loose, pull the brake cable downwards) and then, retighten bolt (C). If it is too loose or too
tight, even after following the first step, adjust the brake pad (fixed) using the Allen key to move the pad (D) away / closer
together
Active Sport
If the brake is too tight or too loose, use the Allen wrench
to loosen the screw (A), then adjust the brake cable,
(shorten the brake cable at the top if it is too tight; if it
is too loose, pull the brake cable downwards) and then,
retighten the screw (A).
Check the correct alignment between the brake caliper
and the disc. Use the screws (B) and (C) to adjust the
position
Active EVO
Argento by Pininfarina KPF
If the brake is too tight or too loose, adjust it by loosening or
tightening the screw (A).
If the brake lever is too soft or too hard even after following the
instructions in the first step, it may be necessary to repeat the
operation until the optimal setting has been reached.
21
Publicidad
