Assembly Instructions - Blatchford AqualimbTF Instrucciones De Uso

7 Assembly Instructions

The instructions in this section are for practitioner use only.
Use appropriate health and safety equipment at all times including extraction facilities.
Be aware of finger trap hazard at all times.
1
Manufacture the socket using the appropriate
Blatchford single bolt former. Cut a 27 mm
diameter hole in distal end of socket. Place
socket plate inside socket. Assemble alignment
parts supplied. Minimum socket thickness 6 mm.
3
Apply Loctite 243 to bolt threads. Assemble the
distal top housing using the nut and washer
as shown and torque tighten to 35 Nm after
alignment.
2
Apply Loctite 243 and torque the proximal
alignment bolt to 35 Nm. Use a peg spanner
(940060) to prevent the socket plate from
rotating.
4
It may be easier to fit the shin
before assembling the top housing.
Ensure full engagement of shin, see
diagram Section Bench Alignment.
9
8
35 Nm
938321PK1/2-0921