Hkoenig oly900 Manual De Instrucciones página 7

3. Close the hopper lid and put
the oil box in the place.
Note : The hopper lid must be
in correct position otherwise the
machine won't work.
6. Select the proper program, according to the
ingredient you are using.*
The oil pressing machine has 7 Presets as follows:
Peanuts, Sesame, Sunflower Seeds, Rapeseeds,
Flaxseeds, Walnut Core, Mixed. Select the proper program
for the ingredient you are using. If the seed or nut is not
listed, consult the matching table.
8. Preheating will last for about
30 seconds - 1 minute,
depending on the program you
have selected, then, the
pressing operation will start.
4. Put the residue box
below the extrusion hole;
9. The machine will
automatically stop after 1
minute and power off after
5 minutes if the hopper
has no ingredients inside.
You need to press the
Power button to start
squeezing again.
5. Connect to the power source
and press the Power button,
the selection screen will be lit.
7. Press the Start/ Pause
button, the light will flash when
the machine starts to preheat.
10. The machine will
automatically stop for cooling
down if it has been working for
more than 45 minutes. Then, it
won`t work for the next 30
minutes. However, if you need
to force starting it, you have to
pull
out the power plug for 10
seconds and connect it again to
work).