Warning Label; General Descriptions; Specifications - Cebora POWER ROD 250T - Cell Manual De Instrucciones

EXPLOSIONS
Do not weld in the vicinity of containers under pressure, or in the presence of explosive dust, gases or fumes.
· All cylinders and pressure regulators used in welding operations should be handled with care.
ELECTROMAGNETIC COMPATIBILITY
This machine is manufactured in compliance with the instructions contained in the standard IEC 60974-10 (CL. A), and must
be used solely for professional purposes in an industrial environment. There may be potential difficulties in ensur-
ing electromagnetic compatibility in non-industrial environments.
DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
Do not dispose of electrical equipment together with normal waste!in observance of european directive 2002/96/
ec on Waste Electrical and Electronic equipment and its implementation in accordance with national law, electrical
equipment that has reached the end of its life must be collected separately and returned to an environmentally com-
patible recycling facility. As the owner of the equipment, you should get information on approved collection systems from our
local representative. By applying this european directive you will improve the environment and human health!
IN CASE OF MALFUNCTIONS, REQUEST ASSISTANCE FROM QUALIFIED PERSONNEL.
1�1

Warning label

5 Become trained and read the instructions before working on the machine or welding.
6 Do not remove or paint over (cover) label.
2

GENERAL DESCRIPTIONS

2�1

Specifications

This welding machine is a constant current generator built using INVERTER technology, designed to weld with covered
electrodes and for TIG procedures, with contact starting.
IT MUST NOT BE USED TO DEFROST PIPES, START ENGINES AND CHARGE BATTERIES.
12/13
The following numbered text corresponds to the label
numbered boxes.
B. Drive rolls can injure fingers.
C. Welding wire and drive parts are at welding volt-
age during operation keep hands and metal objects
away.
1 Electric shock from welding electrode or wiring can
kill.
1.1 Wear dry insulating gloves. Do not touch electrode
with bare hand. Do not wear wet or damaged gloves.
1.2 Protect yourself from electric shock by insulating
yourself from work and ground.
1.3 Disconnect input plug or power before working on
machine.
2 Breathing welding fumes can be hazardous to your
health.
2.1 Keep your head out of fumes.
2.2 Use forced ventilation or local exhaust to remove
fumes.
2.3 Use ventilating fan to remove fumes.
3 Welding sparks can cause explosion or fire.
3.1 Keep flammable materials away from welding.
3.2 Welding sparks can cause fires. Have a fire extin-
guisher nearby and have a watchperson ready to
use it.
3.3 Do not weld on drums or any closed containers.
4 Arc rays can burn eyes and injure skin.
4.1 Wear hat and safety glasses. Use ear protection and
button shirt collar. Use welding helmet with correct
shade of filter. Wear complete body protection.
3301035/B