Publicidad
General Information
Ironing: If any fabric part needs to be ironed,
always use a 100 % cotton cloth in-between the
iron and the fabric to protect the fabric surface.
Iron the exterior fabrics (100 %) polyester and
the interior fabrics on gentle heat (110°C on the
iron).
Make sure all parts are completely dry before
reassembly. Check all seams, edges and zips
You may apply a material protector on the ex-
terior fabric after washing. Always apply before
reassembly.
WARNING
Do not place your child/children in the stroller
for at least 24 hours after applying a material
protector. Reassemble after washing
WARNING
Make sure all parts are assembled correctly
according to the instructions in this manual.
48
Your pushchair requires regular care and
maintenance. We recommend that you have
your product serviced regularly, following the
suggested service intervals in order for you to
take full advantage of and maintain the quality
of the product and to minimize the effects of
wear and tear.
Always take your product to an authorised
Emmaljunga retailer to carry out the service.
After every service you will receive a report
covering what has been inspected and checked
together with a note stating the date on which
Chassis number
Delivery control
0
6 month service
Date, stamp
6
Customer name, signature
24 month service
Date, stamp
24
Customer name, signature
ALU S V1.1
ALU S V1.1
Service Documentation
the service has been carried out.
Before the pram is sent from the factory it has
undergone regular checks and testing. Another
check is completed before the product is given
to you to ensure that it fulfills all safety and
quality requirements.
In addition to the regular service by your
authorised retailer it is very important that you
also check and maintain the product. You can
find out more about this under the care and
maintenance section in the product manual.
12 month service
Date, stamp
12
Customer name, signature
36 month service
Date, stamp
36
Customer name, signature
EN
49
Publicidad
