Balluff BIR 01-K15AL-000S92 Serie Manual De Instrucciones página 31

BIR 01- _ _ _ _ -K15AL _-000S92
Inductive Rapid Positioning System
1
About this guide
1.1 Validity
This guide provides all the information required for the safe
use of the BIR inductive rapid positioning system with
IO-Link interface and analog current or voltage interface.
It applies to the following type (see Type code on
page 23).
– BIR 01- _ _ _ _ -K15AL _-000S92
Read this guide and the other applicable documents
completely before installing and operating the product.
Original User's guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2022, Balluff GmbH
All contents are protected by copyright. All rights reserved,
including the right to reproduce, publish, edit and translate
this document.
1.2 Other applicable documents
Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the following
documents:
– Data sheet
– Declaration of Conformity
– Disposal
1.3 Symbols and conventions
Individual actions are indicated by a preceding triangle.
► Instruction 1
Action sequences are numbered:
1. Instruction 1
2. Instruction 2
Numbers unless otherwise indicated are decimals
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
www.balluff.com
1.4 Explanation of the warnings
Always observe the warnings in these instructions and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
► Measures to avoid hazards
The individual signal words mean:
NOTICE
Identifies a danger that could damage or destroy the
product.
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious injury.
english 5