Franke FMY 24 WCR XS Manual De Instalación Y Servicio página 9

INSTALLATION
POSITIONING AND CONNECTION
Installation, electrical connections and repairs must be carried out by
a qualified technician�
UNPACKING
Unpack the device immediately and make sure it has not been damaged
during transport� Should it be damaged, do not connect, and get in
touch with the Dealer�
Carefully remove the protections and the adhesives, open the door and
make sure all the components are present�
Take out the power supply cable�
POSITIONING
Position the device in a well ventilated area, not damp and free (avoid
cabinets with closed walls)�
Keep the device away from heat sources�
Make sure the minimum distances between the device and the walls of
the room where it is placed are kept, in order to ensure perfect ventilation
of the device�
See figure�
VENTILATION SPACE:
AT LEAST 50 MM
WIRING CONNECTION
After transport, stand the device vertically, and wait for at least 3 hours
before connecting it to the wiring system� Before putting the plug into
the power socket, make sure that:
• the socket is earthed and according to legal regulations;
• the socket is able to hold up to the maximum power load of the
machine, indicated on the Data Sheet table or on the feature plate to
the bottom right (see Overview);
• the power supply voltage falls within the range indicated on the Data
Sheet table or on the feature plate to the bottom right (see Overview);
• the power socket is compatible with the plug of the device� Otherwise,
replace the socket or the plug; do not use extensions or multiple
sockets�
Dimensions of the compartment
min. 560 mm
588 mm
HERE, "PUSH TO OPEN" HERE, "PUSH TO OPEN"
HERE, "PUSH TO CLOSE" HERE, "PUSH TO CLOSE"
– 9 –
560 mm
DIMENSIONS OF DIMENSIONS OF
THE CELLAR THE CELLAR
FURNITURE SIDE FURNITURE SIDE
AREA AREA
EN