Publicidad
Idiomas disponibles
Idiomas disponibles
3.25
R
L
Fig. 3.25
Using the 6 mm hex key, remove the crank arm plug (A) from the lower position (B) on the
„
crank.
Replace the crank arm plug in the upper position (C) on the crank and hand tighten using a
„
6 mm hex key (10 Nm / 88.5 in-lbf).
Reassemble the pedals (as in Fig. 3.21).
„
17
6 mm
R E M O V I N G & R E I N S T A L L I N G T H E W H E E L S
Your Jett bicycle is fitted with a front and rear bolt-on axle which attaches the wheels to the
bicycle. The following steps will guide you through the removal and installation of the wheels
for maintenance or repairs on both multi-speed and single-speed models.
WARNING! A correctly installed wheel is critical for the rider's safety. If you are
unfamiliar with removing (or installing) wheels, contact your Authorized Specialized
Retailer.
3.26
B
C
Fig. 3.26
REMOVING THE FRONT WHEEL ON MULTI-SPEED MODELS
Disconnect the front brake cable by squeezing the brake arms (A) together and unhooking
„
the noodle end (B) from the quick release cradle (C).
Publicidad
