CHECKING THE TIRE PRESSURE
Required tools (not supplied): Tire pressure gauge; air compressor / inflator or heavy-duty bicycle pump.
Check the air pressure in all tires before use. Improper air pressure will affect handling, steering response, traction, tire
life, level cutting, and operator comfort. Be sure tires are inflated to the pressure shown below.
It is important for level mowing that all tires have the correct amount of air pressure. If the mower is not tracking
straight, please check the air pressure of the wheels first.
NOTICE: Tire pressure should only be measured or adjusted when tires are cold.
Recommended Pressure
WARNING: Check the tire pressure carefully while inflating. Too much air in the tire could cause the tire to burst,
causing serious personal injury.
WARNING: Maintaining correct air pressure in the tires is very important. Too little pressure could allow the tire to
rotate off the wheel rim. Too much pressure could cause the tire to burst. Failure to maintain correct air pressure in the
tires could cause problems with mower operation and stability, causing serious personal injury.
REPLACING THE WHEELS
Required tools (not supplied):
◾
Automotive jack
◾
Jack Stand
◾
Wheel chocks
◾
Two 18 mm open-end wrenches or adjustable wrenches.
◾
Torque wrench with 18 mm socket
◾
Flat-blade screwdriver
DANGER : If raising the mower, make sure that the mower is properly secured and the parking brake is set before
proceeding. Failure to properly secure the mower could cause it to fall, resulting in death or possible serious personal
injury.
Front Wheel
32 PSI (222.1 kPa)
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200S/ZT4200S-FC
Rear Wheel
16.8 PSI (115.8 kPa)
59