4.3 - TANK CLEANING
•
If the drainage tank is dirty, wash it with cold or lukewarm water.
•
Switch the appliance off and disconnect the plug from the power socket.
•
Remove the tank (7).
Do not use detergent, scouring pads, chemically treated dust cloths, gasoline, ben-
zene, thinner or other solvents, as these can scratch and damage the tank and cause
water leakage.
5 - PRESERVATION OF THE APPLIANCE
If you do not intend to use the appliance for a particularly long period of time or if operations which could
produce a lot of dust must be performed, it is advised to store the appliance as follows:
• Switch the appliance off and disconnect the plug from the power socket.
• Empty any water remaining in the tank.
• Clean the air filter.
• Store in a fresh and dry place away from humidity.
6 - TECHNICAL DATA
Consult the rating plate applied to the product (Fig. 2) and the technical data listed below:
Rated Capacity
Power supply
Water tank capacity
Maximum Refrigerant Charge
Net weight
Maximum design pressure
Minimum room size
Dimensions
Fuse
SECCOPROF 30 P
30L / day (30°C, 80%RH)
AC 220-240V / 50Hz
8 L
R290 / 83g
25.5 kg
High Side: 3.2 MPa
Low Side: 1 MPa
4 m
(floor area)
2
312 x 453 x 635 mm
3.15 A
SECCOPROF 40 P
40L / day (30°C, 80%RH)
AC 220-240V / 50Hz
8 L
R290 / 96g
25.5 kg
High Side: 3.2 MPa
Low Side: 1 MPa
4 m
(floor area)
2
312 x 453 x 635 mm
3.15 A
EN - 17
SECCOPROF 30P - 40P